This edition of PasswordMaker is a small, lightweight, free (licensed under the LGPL Open Source license), extension for many of the most popular Gecko based web browsers, including: Firefox, SeaMonkey, Mozilla Suite, Flock and Netscape.
It creates unique, secure passwords that are very easy for you to retrieve, but no one else. Nothing is stored anywhere, anytime, so there's nothing to be hacked, lost, or stolen.
Much of the following information is applicable only to the 1.7.x versions of PasswordMaker. If you are using an older version, please upgrade, and then come back here to learn how to take advantage of all of the unique and powerful features PWM has to offer.
First Things First
In order to prevent some of the most common errors - and to save you a lot of confusion and frustration - you are strongly encouraged to read this entire page, along with the FAQ, at least once prior to attempting to use PasswordMaker.
Precautions and Caveats
PasswordMaker has two different 'modes' that it can operate in - Basic, and Advanced.
Using PasswordMaker in Basic mode (using only the Basic Options) is very secure, and is the recommended way to start out, but there are certain things you should understand in order to avoid problems - the most common of which is locking yourself out of one of your online accounts.
With this in mind, it is best to:
- be sure that you have defined an alternate email address for any important accounts, so you will be able to 'reset' or 'recover' your password in the event that you lock yourself out (this is a good thing to do anyway, whether you use PasswordMaker or not)
- practice a few times on a throw away account, like gmail or yahoo - but the first recommendation still applies
- start out using PasswordMaker in Basic mode - but first learn the difference between Basic and Advanced modes so that you will know if/when you need to switch to the Advanced mode
Basic and Advanced Modes - Differences
The main difference between the two modes is primarily one of complexity, in the form of the large number of configuration options. We will get into each in detail below, but for now:
- PasswordMaker uses the concept of Accounts to identify a group of settings that work together to generate a password
- In Basic mode, there is only one account that matters (referred to as the Defaults account) - so, only one group of settings (referred to as the Defaults settings), that are applied to every site that you log into
- The main advantage of using only the Basic options is simplicity
- In Advanced mode
- you can create as many unique accounts as desired, each of which has its own settings that are applied only when that account is used
- you must define the URL(s) that identify each account
- you can define multiple URLs for any given account, which means:
- PasswordMaker will use the same settings for all of these sites
- PasswordMaker will generate the same password for all of these sites
- you can optionally save the master password hash, which is a very convenient and safe way to verify that you have entered the same master password when logging into as site as when you created the password - essentially preventing any failed logins
- The main advantage of using the 'Advanced' options is the ability to customize the way PasswordMaker behaves for different sites/accounts
Password Generation - Parameters and Triggers
Regardless of which mode you are using, PasswordMaker makes it very easy to generate unique passwords for different sites on demand - and can optionally automatically detect when you are on a login page - or via a simple keystroke or toolbar button click - prompt you for the master password, and then populate both the username and password fields.
- The parameters used to generate any given password are:
- the contents of the Using Text field, which by default is the URL components you have enabled (the default is to only use the TLD (top-level domain) - e.g., passwordmaker.org
- the username, if defined
- the extended attributes as provided, or modified by you
- the master password used
- There are two ways PasswordMaker can be triggered into action:
- manually, using the ctrl-` key combination, or
- automatically, if the Auto-populate option is enabled
- if there is no password field detected on the current web page, PasswordMaker will do nothing
When PasswordMaker is triggered, it compares the currently detected URL pattern - which consists of only the components enabled in the Defaults settings - against the defined URL patterns for all of your custom accounts, and
- if a match is not found in any custom accounts that you have defined, then the Defaults settings will be used
- if only one account contains a pattern match, the Master Password Prompt window is opened
- if more than one account contains a pattern match, the Account Selection window opens first, allowing you to select which Account you want to use, and then the Master Password Prompt window is opened
Installation and Initial Configuration
When the installation is complete, a restart of your browser is required to make PasswordMaker available for use. Once you have successfully installed PasswordMaker, there are three ways to open it:
- the PasswordMaker option from the Tools sub-menu:
- the Toolbar icon (golden ring):
- the <ctrl> ` shortcut key (almost always above the 'Tab' key) which looks like this on en-US keyboards:
For Mozilla and Netscape users, the toolbar icon is installed by default. For Firefox users, the toolbar icon must be manually added by using the "View -> Toolbars -> Customize" menu, and then dragging the golden ring icon on to the toolbar.
TODO: need Flock installation instructions...
Once you've installed the extension and configured the Toolbar to your liking, you can Open PasswordMaker by either clicking on the main toolbar button (the golden ring are presented with the Basic Options screen:
Basic Mode / Options
Here we describe the textboxes and buttons on the Basic Options dialog.
1. Master Password
Your ONE "password to rule them all". This password, when combined with a URL (or whatever text string you choose), hash algorithm, optional l33t-speak, username, and counter, is used to generate unique, site-specific passwords, as explained in the introduction.
Note: the reference to 'One' master password is more symbolic than anything, as there is nothing to prevent you from using 2, 5, or as many different master passwords as you like - although that kind of defeats the purpose of PasswordMaker, which is to make things simpler, right?
2. Store Master Password
- Not at all - the master password is not stored anywhere at any time (memory or disk). This is the most secure option, but also the least convenient because you are prompted to enter the master password everytime a password is generated.
- In memory - the master password is stored encrypted in the browser's memory but not on disk. This option provides a reasonable trade-off between security and convenience. You won't be prompted to enter the master password again until all browser instances have closed (disposing memory contents), and the browser is re-opened. The master password is encrypted in memory so that if it's written to disk by the operating system as part of a swap file/paging file, it can't easily be decrypted.
- Store master password on disk and in memory - the master password is stored encrypted on the local hard drive and in memory. This option is the least secure, but the most convenient. You won't ever be prompted to enter the master password when using this option. Note: although the encryption used to store the master password is strong, the encryption/decryption key is also stored on your local hard drive. This makes decryption of the master password relatively simple. You should not use this option unless either (a) you are the only person with access to the hard drive, or (b) you are comfortable with the master password possibly being decrypted by others.
3. Using Text
By default, this shows only the URL compnents of the current URL being used to generate the password, but you can change this to anything you want.
4. Generated Password
Here you see the generated password. It'll be shown as plain test, or encrypted depending on your setting.
5. Copy Generated Password to Clipboard
This button copies the generated password to the clipboard where it remains for the amount of time specified amount in the [advanced-options.xhtml Advanced Options] dialog (10 seconds by default).
6. Advanced Options
Clicking here will switch to the Advanced mode/options.
The Close button closes the current dialog.
Using PasswordMaker In 'Basic' Mode
There are three ways that you will use PasswordMaker from this point forward (assuming you stick with it - and please do - it is well worth the effort - once you 'get it', you'll never know how you lived without it):
- to generate a password for a new account when you are first signing up
- to change the password for an existing account
- to log into an account that you have already changed to a PasswordMaker password
Without PasswordMaker, when you go to any site that requires a username and password, you would manually type in your username, then your password, then click the 'Login' button (or sometimes you can just hit the Enter key).
You will still have to do this for each site that you use, in order to convert the site to work properly with PasswordMaker - but only one more time. From that time forward, you will be able to use PasswordMaker to populate those fields for you, quickly and securely, only having to remember your master password.
As was suggested earlier, please choose some non-essential sites to do first, and make sure that you have properly set up an alternate email address, so that you can unlock the account if you inadvertently lock yourself out of it.
So, to get started, either:
- click here and print out the page the opens, so that you have these full instructions for changing your password handy, or
- open the site you will be using in a new browser tab, and flip between the two sites that way
- follow the instructions for changing your password to one that PasswordMaker generates
Generate Password for a New Account
Password Change Procedure
When you go to a site which requires a password, PasswordMaker, depending on the settings, will either auto populate the password field, let you right click on the password field and give you the selection PasswordMaker in the context menu (todo: link to context-menu section). Then, depending on whether PasswordMaker knows your master password, or not, it will prompt you for your master password and populate the password box on the site, or just populate the password box on the site.
Again, depending on your settings, the password populated in to the password field of the site will either be an account specific, or a default password.
After PasswordMaker has been installed, you should decide whether you wish to log in to your online account, be it a bank account, a subscription type service, with an account / URL specific password, or a default password. The account specific password will be set up with a URL, so that PasswordMaker knows to use those specific settings for the site with the URL set up.
Of course, PasswordMaker can not and will not know your site specific password, unless you change the password of the site or service to the password generated by PasswordMaker. You do this by logging in to the site in question and select to change the password on that site. Typically, you will supply your old password and then a new password, which you will the have to enter again to confirm the new password. Here's an animated example of this process:
Log-In to an Existing Account
When you visit a site which requires a password, just enter your username and right click on the password box and select PasswordMaker to fill in your password, which is determined by your settings. (todo: discuss CoolKey or link to CoolKey section). Then, when you click on the login button, you will be logged into the site. Here is another animated example:
This button displays the help page.